News

If high voltage epoxy resin is not fixed properly, it may affect the reliability of high voltage standoff contact, causing momentary power failure and ...

The uniformity of the electric field significantly affects the insulation performance of the epoxy bushing. If an excessively strong electric field ex ...

Insulation Contact Box can usually effectively reduce the line electric field strength and voltage gradient, improve the insulation performance and st ...

The external power supply of Embedded Pole is required to be no more than 70W, which makes it easy to equip a backup power supply. The uniquely design ...

high voltage standoff insulators not only acts as an insulator, but high voltage epoxy also usually provides precise centering and protection for the ...

Based on high-voltage insulation principles, we know that the electrical breakdown process of epoxy bushing is similar to that of gases: impact ioniza ...

Insulation Contact Box is usually made of ceramic, rubber and other materials, and has good insulation and high temperature resistance, making it suit ...

The Embedded Pole operating mechanism is a spring operating mechanism, which is available in manual and electric versions. A remote control device and ...

It is also possible that there is pollution and moisture such as metal residue, flux, etc. on the surface or inside of high voltage epoxy resin, and t ...

Despite this, the scrap rate for epoxy bushing finished products remains relatively high. This, coupled with the losses caused by damage to the vacuum ...

Insulation Contact Box usually has a larger contact area and higher insulation strength, which can effectively disperse the voltage and tension on the ...

The Embedded Pole is resistant to ozone, UV rays, hydrophobicity, and high and low temperature. Furthermore, the box contains no transformer oil or su ...

This puts forward stricter requirements on the insulation material, injection mold precision of high voltage standoff insulators and the molding proce ...

During the production process of epoxy bushing, the pole should ensure that it will not cause performance degradation or loss of epoxy resin bushing, ...

Insulation Contact Box is usually suitable for the installation and insulation support of grounding wires, jumpers and other equipment. It has good pr ...

The insulation part of Embedded Pole is made of epoxy resin and silicone rubber composite insulation material, which has high insulation grade and str ...

The function of the insulator high voltage epoxy is to keep the contacts epoxy resin insulator arranged in the correct position. Therefore, the insula ...

The situation of epoxy bushing electrical breakdown often occurs in epoxy resin bushing. Since the solid insulating materials of epoxy resin cast bush ...

Insulation Contact Box is usually used for connecting and fixing insulated wires. There is usually a perforation at the bottom of the insulating conta ...

The Embedded Pole housing is made of high-quality stainless steel or ordinary steel plate through Dacromet anti-rust treatment process and then spraye ...

Therefore, due to the unreasonable structural design of high voltage standoff, wrong material selection, unstable mold, rough surface, unreasonable su ...

When we conduct power frequency withstand voltage test on epoxy resin cast bushing switchgear, during the process of uniformly boosting the test volta ...

Insulation Contact Box is usually made of materials such as glass fiber, which has good insulation performance and mechanical strength. It can effecti ...

Embedded Pole adopts the advanced APG technology to directly seal the main conductive circuit in the epoxy resin pole to form a sealed insulation meth ...