News

Composite high voltage standoff insulators is also called synthetic high voltage epoxy. Its main structure consists of three parts: shed sheath, epoxy ...

Prevent human defects. When the personnel responsible for the handover test remove and connect the lead wire of the small epoxy bushing of the end scr ...

Vibration: The vibration generated during the operation of the equipment will cause the Insulation Contact Box to be subjected to periodic stress, and ...

Embedded Pole uses the APG process and epoxy resin as the insulating medium. The epoxy resin is used to seal the vacuum interrupter, the primary condu ...

Rod-shaped suspension composite high voltage standoff insulators for high-voltage lines: Rod-shaped suspension composite high voltage epoxy is used fo ...

Pay attention to the tightness of the voltage-equalizing ball to prevent discharge events. The voltage-equalizing ball is installed at the tail of the ...

During use, Insulation Contact Box will be subjected to various mechanical stresses, including stretching, compression, bending, vibration, etc. These ...

During the operation and maintenance period, Embedded Pole needs to be regularly inspected by infrared thermal imaging. When the abnormal temperature ...

high voltage standoff insulators has good hydrophobicity, high voltage epoxy overall structure ensures that the internal insulation is not damp, epoxy ...

If moisture in the environment enters the root of the transformer lead, it will cause the transformer to be damp and punctured, which will cause a pow ...

Environmental factors have an important impact on the performance of Insulation Contact Box, mainly including temperature, humidity, ultraviolet radia ...

In gas-insulated switchgear below 40.5kV, the Embedded Pole can be used as a busbar connection unit to reduce the equipment volume by more than 30%. I ...

high voltage standoff insulators is suitable for polluted areas, high mechanical tensile loads, large spans and compact lines. The pollution flashover ...

Pay attention to the installation details of epoxy bushing to prevent the top seal from failing. The top seal of epoxy resin bushing is generally divi ...

1. Material aging Insulating materials will gradually age during long-term use, resulting in a decrease in their insulation performance. The aging pro ...

Silicone rubber has become the mainstream Embedded Pole choice due to its flexibility and high temperature resistance (operating temperature range -60 ...

Composite pillar high voltage standoff insulators: Composite pillar high voltage epoxy can effectively use narrow corridors to open voltage and transm ...

Pay attention to the installation environment of epoxy bushing to prevent epoxy resin bushing from getting damp during the construction process. Durin ...

Insulation Contact Box plays a vital role in electrical equipment. Its main function is to isolate conductors with different potentials, prevent curre ...

Structural design The integrated is usually composed of a conductive rod, an insulating layer, a shielding layer and an external protective layer. The ...

(3) high voltage standoff insulators is Easy operation and maintenance. The excellent pollution resistance of organic external insulation improves the ...

Since the main reason for the failure of the main transformer epoxy bushing is due to the poor sealing and insulation failure of epoxy resin bushing, ...

∙ Insulation Contact Box The contact area must reach the ±2% error range of the design value, and the surface roughness must be controlled at Ra ≤ 1.6 ...

The integrated Embedded Pole is a key component widely used in high-voltage electrical equipment. Its main function is to achieve a close combination ...