News

The hydrophobicity of the low-energy surface of organic composite materials is the main reason for the excellent wet dirt resistance of composite high ...

epoxy bushing The process involves multiple links, and each step requires fine operation to ensure the quality of the finished product. The process is ...

The unreasonable design of Insulation Contact Box may also lead to its failure. For example, the insufficient thickness of the insulating contact box, ...

APG technology is mainly used in the production of medium and high voltage epoxy insulation products. Its characteristics are that the production cycl ...

(1) High strength and light weight. The strength-to-weight ratio of composite high voltage standoff insulators is very high, that is, the specific str ...

It can be said that this is a very successful epoxy bushing overhaul. Through this epoxy resin bushing overhaul, the epoxy resin cast bushing maintena ...

Impact: External impact or collision may cause damage to the surface of the insulating parts or the internal structure, reducing the Insulation Contac ...

Epoxy resin is both the main insulation of the primary part and the mechanical support of Embedded Pole. Its electric field distribution is superior t ...

Composite high voltage standoff insulators is also called synthetic high voltage epoxy. Its main structure consists of three parts: shed sheath, epoxy ...

Prevent human defects. When the personnel responsible for the handover test remove and connect the lead wire of the small epoxy bushing of the end scr ...

Vibration: The vibration generated during the operation of the equipment will cause the Insulation Contact Box to be subjected to periodic stress, and ...

Embedded Pole uses the APG process and epoxy resin as the insulating medium. The epoxy resin is used to seal the vacuum interrupter, the primary condu ...

Rod-shaped suspension composite high voltage standoff insulators for high-voltage lines: Rod-shaped suspension composite high voltage epoxy is used fo ...

Pay attention to the tightness of the voltage-equalizing ball to prevent discharge events. The voltage-equalizing ball is installed at the tail of the ...

During use, Insulation Contact Box will be subjected to various mechanical stresses, including stretching, compression, bending, vibration, etc. These ...

During the operation and maintenance period, Embedded Pole needs to be regularly inspected by infrared thermal imaging. When the abnormal temperature ...

high voltage standoff insulators has good hydrophobicity, high voltage epoxy overall structure ensures that the internal insulation is not damp, epoxy ...

If moisture in the environment enters the root of the transformer lead, it will cause the transformer to be damp and punctured, which will cause a pow ...

Environmental factors have an important impact on the performance of Insulation Contact Box, mainly including temperature, humidity, ultraviolet radia ...

In gas-insulated switchgear below 40.5kV, the Embedded Pole can be used as a busbar connection unit to reduce the equipment volume by more than 30%. I ...

high voltage standoff insulators is suitable for polluted areas, high mechanical tensile loads, large spans and compact lines. The pollution flashover ...

Pay attention to the installation details of epoxy bushing to prevent the top seal from failing. The top seal of epoxy resin bushing is generally divi ...

1. Material aging Insulating materials will gradually age during long-term use, resulting in a decrease in their insulation performance. The aging pro ...

Silicone rubber has become the mainstream Embedded Pole choice due to its flexibility and high temperature resistance (operating temperature range -60 ...