News

The rod-shaped suspension composite high voltage standoff insulators is composed of glass fiber epoxy resin drawing rod, silicone rubber shed and hard ...

There are many types of transformers epoxy bushing, which are divided into pure porcelain type epoxy resin bushing, oil-paper capacitor type epoxy res ...

Insulation Contact Box In a corrosive environment (such as acid, alkali, salt spray, etc.), chemical reactions will occur, causing corrosion of the ma ...

In order to learn technology, in 1999, the Power Grid Operation Department and the Production Department of the Ministry of Electric Power Industry to ...

high voltage standoff insulators has superior electrical performance and high mechanical strength. The bending strength of the epoxy glass fiber pull ...

In actual use, epoxy bushing is not foolproof. As the use time continues to increase, epoxy resin bushing may have various faults. For example, epoxy ...

Pollution: If dust, oil and other pollutants accumulate on the surface of Insulation Contact Box, the surface resistance will decrease and the risk of ...

ABB has played a leading role in the development of Embedded Pole research. Its new products have their own characteristics and represent the trend of ...

The rod-shaped suspended synthetic high voltage standoff insulators is extremely convenient to transport and install, and high voltage epoxy does not ...

The application type of epoxy bushing depends on the model of the transformer. There are certain differences in the functions of different epoxy resin ...

If the surface of Insulation Contact Box is contaminated or corroded, its insulation performance will be significantly reduced. ...

After the epoxy resin cast Embedded Pole was introduced, it was tried to replace the traditional assembled pole and installed on the ABB spring operat ...

The composite pillar high voltage standoff insulators is small in size and light in weight (only 1/6~1/9 of the same voltage level porcelain high volt ...

There are different types of transformers on the market, which leads to obvious differences in the models and materials of epoxy bushing. Starting fro ...

Operation overvoltage: The equipment will generate instantaneous overvoltage during the switching operation. If the voltage withstand capacity of Insu ...

After the epoxy resin cast Embedded Pole came out, it was tried to replace the traditional assembled pole and installed on the ABB spring operating me ...

high voltage standoff insulators has excellent electrical performance, high voltage epoxy has high mechanical strength, and epoxy resin insulator has ...

In order to better maintain the safety of the power system, strengthen epoxy bushing maintenance, and prevent problems with epoxy resin bushing, it is ...

Lightning overvoltage: When lightning strikes equipment or the area near Insulation Contact Box, it will generate very high instantaneous voltage, whi ...

In 1997, ABB engineers in the UK and the US jointly developed a new type of VMI vacuum circuit breaker, which uses a magnetic drive mechanism consisti ...

The rod-shaped suspended synthetic high voltage standoff insulators is extremely convenient to transport and install, high voltage epoxy does not requ ...

Abstract: epoxy bushing is the key to ensure the efficient operation of the transformer, epoxy resin bushing is suitable for centering conditions, and ...

Overvoltage is one of the common causes of Insulation Contact Box failure. Overvoltage may be caused by lightning, operating overvoltage or system fai ...

The Embedded Pole vacuum circuit breaker VMI launched by ABB is designed to replace the insulating sleeve type VSI and promote the technological progr ...