News

The rod-shaped suspended synthetic high voltage standoff insulators is extremely convenient to transport and install, and high voltage epoxy does not ...

The application type of epoxy bushing depends on the model of the transformer. There are certain differences in the functions of different epoxy resin ...

If the surface of Insulation Contact Box is contaminated or corroded, its insulation performance will be significantly reduced. ...

After the epoxy resin cast Embedded Pole was introduced, it was tried to replace the traditional assembled pole and installed on the ABB spring operat ...

The composite pillar high voltage standoff insulators is small in size and light in weight (only 1/6~1/9 of the same voltage level porcelain high volt ...

There are different types of transformers on the market, which leads to obvious differences in the models and materials of epoxy bushing. Starting fro ...

Operation overvoltage: The equipment will generate instantaneous overvoltage during the switching operation. If the voltage withstand capacity of Insu ...

After the epoxy resin cast Embedded Pole came out, it was tried to replace the traditional assembled pole and installed on the ABB spring operating me ...

high voltage standoff insulators has excellent electrical performance, high voltage epoxy has high mechanical strength, and epoxy resin insulator has ...

In order to better maintain the safety of the power system, strengthen epoxy bushing maintenance, and prevent problems with epoxy resin bushing, it is ...

Lightning overvoltage: When lightning strikes equipment or the area near Insulation Contact Box, it will generate very high instantaneous voltage, whi ...

In 1997, ABB engineers in the UK and the US jointly developed a new type of VMI vacuum circuit breaker, which uses a magnetic drive mechanism consisti ...

The rod-shaped suspended synthetic high voltage standoff insulators is extremely convenient to transport and install, high voltage epoxy does not requ ...

Abstract: epoxy bushing is the key to ensure the efficient operation of the transformer, epoxy resin bushing is suitable for centering conditions, and ...

Overvoltage is one of the common causes of Insulation Contact Box failure. Overvoltage may be caused by lightning, operating overvoltage or system fai ...

The Embedded Pole vacuum circuit breaker VMI launched by ABB is designed to replace the insulating sleeve type VSI and promote the technological progr ...

high voltage standoff insulators has good pollution resistance, good anti-pollution performance, strong anti-pollution flashover, high voltage epoxy w ...

The direction of epoxy bushing process improvement can consider automated impregnation line, and install visual inspection system to judge the impregn ...

Improper surface treatment: Improper surface treatment of Insulation Contact Box (such as excessive roughness, uneven coating) will affect its voltage ...

When the external insulation of the miniaturized vacuum interrupter in the air cannot meet the parameter values ​​specified in the Embedded Pole stand ...

high voltage standoff insulators is suitable for polluted areas, high mechanical tensile loads, large spans and compact lines. The flashover voltage i ...

Common epoxy bushing problems include epoxy resin bushing residual bubbles, epoxy resin cast bushing uneven curing, and epoxy bushing manufacturer dim ...

Bubbles and impurities: The presence of bubbles or impurities inside the insulating material can cause electric field concentration, resulting in loca ...

The phase column insulation of the vacuum circuit breaker has been layered with air insulation, composite insulation, and sealed insulation. This has ...